Google Analytics Reports for Clients - What to Include

Google Analytics Reports for Clients: What to Include

A Google Analytics report can be full of accurate numbers and still leave a client asking whether the work paid off.

That question matters more than any chart. If the client can’t tell what changed and why, the report can’t make the case for your work when it’s time to renew.

A report that answers that question starts with the client’s goal. Every number in it then comes with a comparison and a clear reason it moved.

In this guide, we’ll walk through what to include in Google Analytics reports for clients, how to explain each number, and how to send the finished report. The same report structure works whether you’re a freelancer, work at an agency or report to a manager in-house.

MonsterInsights is the best WordPress Analytics plugin. Get it for free!

In This Article:

What to Include in Google Analytics Reports for Clients

A Google Analytics report for clients should answer one question: is the website doing what the client is paying for?

A useful client report has five parts: a short summary, the key events tied to the client’s goal, traffic by channel, the top landing pages, and your next steps. “Key events” is what Google Analytics used to call “conversions.”

Here’s where each part of the report comes from in Google Analytics, and the question it answers for the client:

REPORT SECTIONQUESTION IT ANSWERS FOR THE CLIENTWHERE IT COMES FROM IN GOOGLE ANALYTICS
SummaryIs the website doing its job?You write it, using the four sections below
Key events for the goalHow many leads, sales or bookings did the site bring in?The Key events column in Reports » Acquisition » Traffic acquisition
Traffic by channelWhere did those visitors and results come from?Traffic acquisition, grouped by Session primary channel group
Top landing pagesWhich pages brought in the results?Reports » Engagement » Landing page
Next stepsWhat happens next month?You write it, based on what the numbers show

The summary and the next steps are the two parts you write yourself. They turn the numbers into a decision, so they’re worth writing last, once the numbers in the middle are settled.

Start Google Analytics Client Reports With the Client’s Goal

A Google Analytics client report needs a goal before it needs a single number. Without one, there’s no way to say whether a month was good or bad.

Google Analytics calls the actions that matter to a business “key events,” and you decide which events count. Each client goal should map to one or two of them. That could be a lead form submission for a service business, a purchase for a store, or a booking for a clinic.

A report built on key events leaves out anything that isn’t marked as a key event. So before the first report goes out, it’s worth confirming that the client’s goal is actually tracked.

If you learned Google Analytics when it still had goals, our explainer covers why goals are gone and what replaced them.

I’d also suggest relabeling the “Key events” row in your report with the client’s own word. “Leads” or “Bookings” means more to a client than “Key events” does.

Key Events and Traffic Channels in a Client Report

Key events by channel show a client where their results came from. A month with more leads is good news, and knowing which channel drove it tells the client where to keep spending.

In Google Analytics, open Reports » Acquisition » Traffic acquisition. The report groups sessions by Session primary channel group, which sorts each visit into a channel such as Organic Search, Referral or Email.

To compare two periods, open the date picker at the top right, turn on Compare and click Apply. Each channel then splits into one row per date range, plus a % change row for Sessions, Engagement rate and every other column.

Google Analytics Traffic acquisition report comparing two date ranges, with sessions, engaged sessions and engagement rate for each channel and the percent change between periods

Scroll right in the same table to find the Key events column. Its menu lets you pick a single key event, such as a form submission, instead of counting every key event together.

That one table covers two of the report’s five parts, because it shows the result tied to the goal and the channels behind it.

Landing Pages and Content in a Client Report

Landing pages in a client report show which pages brought in the results. The Landing page report, under Reports » Engagement » Landing page, lists the page where each session started, with sessions and key events for each one.

I’d keep this section to the top three pages by key events. A long list of URLs makes the client do the sorting, and that’s your job. For a tour of everything else in the Reports section, see our Google Analytics reports guide.

What to Leave Out of a Google Analytics Client Report

A Google Analytics client report is easier to read when it leaves out the metrics that don’t serve the client’s goal. A number belongs in the report only if it connects to that goal and comes with a comparison.

A total with nothing beside it can’t show progress. A month with 5,000 sessions could be a great month or a slump, and the client has no way to tell which.

A big number that doesn’t change any decision can stay out too. We’ve covered those in our list of Google Analytics vanity metrics.

A Summary Sentence You Can Reuse

Each month’s summary can follow one fill-in sentence: “[Leads] rose (or fell) to [number] this month, [percent] from last month, mostly because of [channel or change].” If you can’t fill in the last blank, the change needs more checking before the report goes out.

Metrics worth tracking →

A Google Analytics Client Report Example

Here’s what a one-page monthly Google Analytics client report can look like for a small service business whose goal is contact-form leads. Every number is an example.

The business in this example is a kitchen remodeling company. It tracks one key event, a contact form submission, and the report calls it “Leads.” Here’s the full report, section by section:

SECTIONEXAMPLE MONTHLY CLIENT REPORT (ILLUSTRATIVE NUMBERS)
SummaryLeads rose to 50 this month, up 25% from last month and about 11% from the same month last year. Organic search drove most of the gain.
Leads (key event)50 this month · 40 last month · 45 in the same month last year
Leads by channelOrganic Search 22 (up from 15) · Direct 12 (no change) · Paid Search 10 (up from 8) · Referral 6 (up from 5)
Top landing pagesServices page: 18 leads · Contact page: 14 leads · “How Much Does a Kitchen Remodel Cost?” blog post: 9 leads
Next stepsLink to the contact form from two posts related to the cost guide. Keep the paid search budget steady for another month to see whether the gain holds.

Every percent change in the summary uses one formula:

percent change = (this period − last period) ÷ last period × 100

Month over month, that’s (50 − 40) ÷ 40 × 100 = 25%. Year over year, it’s (50 − 45) ÷ 45 × 100, or about 11%.

The two comparisons tell slightly different stories. Month over month looks like a big jump, while year over year shows steadier growth. Reporting both keeps one strong month from looking bigger than it is.

The order matters too. The summary comes first because it answers the client’s question in two sentences, and every row below it backs that answer up. For next month’s report, you can keep this structure and change only the numbers and the next steps.

Turn the Monthly Google Analytics Client Report Into a Year-End Review

A year-end Google Analytics client report uses the same five parts as the monthly report, stretched over 12 months.

Set the date range to the last 12 months and compare it with the 12 months before. Then put each month’s key events next to the same month a year earlier, so a seasonal swing doesn’t read as a win or a loss.

It’s worth calling out the best and worst months and giving each one a reason. If a big change lines up with a site launch, a campaign or a tracking fix, an annotation on that date makes the reason easy to show.

I’d close the year-end report with a goal for the year ahead, stated in the same key event the client sees each month. That way, the next 12 monthly reports all measure progress toward one number.

How to Explain Google Analytics Numbers to Clients

Explaining Google Analytics numbers to clients works best when every number comes with a comparison, a cause and a next step. A total on its own tells a client nothing. The same total next to last month, last year and the change you made between them tells them whether the work is paying off.

If you’d like a refresher on the reports themselves first, our Google Analytics beginner’s guide covers how to read them.

Translate Google Analytics Metric Names for Clients

Google Analytics metric names can confuse a client who doesn’t work in analytics. A label like “Session primary channel group” means little outside a marketing team.

Engagement rate and bounce rate both depend on what Google Analytics calls an “engaged session.” A session counts as engaged when it lasts longer than 10 seconds, includes a key event, or includes two or more page or screen views.

Here’s how each metric in a client report translates, with a sentence you can use to explain it:

GOOGLE ANALYTICS LABELWHAT IT COUNTSWHAT TO TELL THE CLIENT
SessionsVisits to the site. One person can have several sessions.“This is how many visits the site got.”
Active usersThe number of people who engaged with the site in the date range“This is roughly how many people visited and interacted with the site.”
Engagement rateThe share of sessions that were engaged“This is the share of visits where someone stayed past 10 seconds, viewed a second page or did what we’re tracking.”
Bounce rateThe percentage of sessions that were not engaged“This is the share of visits that lasted 10 seconds or less, viewed one page and didn’t do what we’re tracking.”
Key eventsThe actions marked as important, such as form submissions or purchases“This is how many leads (or sales, or bookings) the site brought in.”
Session primary channel groupThe channel each session came from, such as Organic Search, Paid Search or Email“This shows where visitors came from: Google search, ads, email or other websites.”

Because engagement rate and bounce rate are opposites, a client report needs only one of them. I’d lead with engagement rate, since it describes what went right, and leave bounce rate out unless the client asks.

Compare Google Analytics Data to the Right Period

The comparison period you choose in Google Analytics decides whether a normal swing looks like a trend.

Month over month shows short-term movement, which helps when you’ve just launched a campaign or changed a page. Year over year compares the same season a year earlier, which takes holidays and seasonal demand out of the picture.

Whichever you pick, keep the two date ranges the same length. A 31-day month compared with a 28-day month can look like a drop even when daily results held steady.

Weekdays matter too. For a business that gets its leads during the work week, a month with an extra weekend can dip for no other reason. If both ranges start on the same weekday, Mondays line up with Mondays.

Holidays need a second look even year over year. Easter and Thanksgiving land on different dates each year, so one of them can fall in only one of the two periods. A short note in the summary keeps that gap from reading as a trend.

Check Why a Google Analytics Number Changed Before You Report It

When a Google Analytics number moves, the summary needs to say why. I’d work through five checks, in this order, before writing it.

The first check is the date ranges themselves, because a mismatch in length, weekdays or holidays can create a change on its own.

Second, look for anything that changed on the site or in tracking on those dates. A launch, a redesign, a new campaign or a tracking change can move a number overnight, and an annotation or your own notes can show when it happened.

Third, check year over year. A drop from last month can still be a gain on the same month last year.

Fourth, find the channel that moved. In Traffic acquisition with Compare on, each channel’s % change row shows where the change came from.

Last, leave the most recent day or two out of the comparison. Google Analytics data processing can take 24 to 48 hours, so those days may still be filling in.

If the answer still isn’t clear after those five checks, the change needs a real diagnosis. We walk through that next step in our guide on how to diagnose a traffic drop.

Add Context to Client Reports With Annotations

Annotations add context to client reports by marking the date something changed, right on the chart.

In Google Analytics, open any report with a line graph, right-click a data point and choose Add annotation. Give it a title, a date and an optional description, then click Create annotation.

Google Analytics line chart with the Add annotation option that appears after right-clicking a data point

Google Analytics annotations appear across all reports and report cards with line graphs. Creating one takes the Analyst role or higher, and anyone with Viewer access can see them. We cover the full setup for Google Analytics and WordPress in our annotations walkthrough.

If you work in WordPress, you can log the same changes as MonsterInsights Site Notes from Insights » Site Notes. Each note then appears under the graphs in your MonsterInsights reports.

Either way, a dated note beside a spike or a dip answers the client’s question before they need to ask it.

Keep the “Why” Right Beside Your Graphs

MonsterInsights Site Notes let you log a launch, a promotion or a site update from WordPress and file it under a category. Each note shows under your report graphs on the date it happened, so the reason behind a change is in front of you when you write the client summary. Site Notes are available on Plus and above.

Explore Site Notes

How to Send Google Analytics Reports to Clients

You can send Google Analytics reports to clients straight from Google Analytics on a schedule, or from WordPress as a PDF or emailed summary. The right route depends on one thing: whether the client has access to the Google Analytics property.

Schedule Google Analytics Reports for Clients Who Have Access

Scheduled Google Analytics reports are the simplest route for clients who can already log in to the property. Only administrators can schedule emailed reports in Google Analytics, and every recipient must already have access to the property.

Scheduled reports arrive as a PDF or CSV attachment, daily, weekly, monthly or quarterly. Each schedule also stops after the period in its “Active for” setting, which runs up to 12 months, so it’s worth setting a calendar reminder to renew it.

We go through the setup in our guide to automated email reports. If the client doesn’t have access yet, our user permissions guide explains which role to give them.

Send Client Reports From WordPress With MonsterInsights

MonsterInsights can send client reports straight from WordPress, which gets the numbers to clients who don’t have a Google Analytics login.

On Plus and above, Email Summaries send a weekly snapshot of the site’s stats to up to five email addresses. You type in each address, so the client doesn’t need a WordPress account either. On the free version, the summary goes to the site admin once a month.

You can turn the emails on under Insights » Settings » Advanced » Email Summaries. Each email shows sessions, page views, average session length and bounce rate, compared with the previous week. The Use Custom Header option in the same settings adds your logo to the top.

The weekly email works as a check-in between monthly reports, and the monthly report explains what those weekly numbers mean.

For a file the client can open anywhere, you can export the report itself. Open any MonsterInsights report and click the download icon at the top right, next to the date picker and Filter. The menu offers Export PDF Report, Export CSV and Export Excel.

MonsterInsights Overview report with the export menu open, showing Export PDF Report, Export CSV and Export Excel options

Export PDF Report downloads a PDF of the report on screen right away, with its date range and filters. PDF export is available on Plus and above.

Export CSV and Export Excel give you the raw data for your own report template. Those exports run in the background, so an Export Started notice appears instead of a download. The finished files collect in the Export Queue under Insights » Tools » Report Export, where each one stays available to download for seven days.

To put your own logo on PDF exports, go to Insights » Settings » Advanced and find the Export PDF Reports section. The Use Custom Header Image option there adds your logo to the top of every PDF.

We cover more options in our roundup of ways to share Google Analytics reports, and we go into the formats in more detail in our report exports announcement.

Whichever route you choose, it helps to send the report on the same day each month and to put your two-sentence summary in the message itself. The client then has the answer before opening a single attachment.

Send Client-Ready Reports From WordPress

MonsterInsights Plus and above emails a weekly stats summary to up to five addresses and exports any report as a PDF with your logo in the header. Your client gets the numbers in their inbox or as a file, with no Google Analytics or WordPress login to set up.

See MonsterInsights Plans

FAQs About Google Analytics Reports for Clients

How often should you send Google Analytics reports to clients?

Match the report to how often the client makes decisions. A monthly report suits steady, ongoing work, while a weekly update makes more sense during an active campaign or a launch. Some clients get both: a short weekly email and a fuller monthly report.

Does a client need Google Analytics access to get a report?

For scheduled Google Analytics emails, yes. Every recipient needs access to the property, and only an administrator can set up the schedule. A downloaded PDF or a weekly MonsterInsights Email Summary (Plus and above) reaches a client without a login. If you’d rather give the client access, our Google Analytics permissions guide explains which role to choose.

Can you add your own branding to a Google Analytics client report?

To put your logo on the report, MonsterInsights lets you add a custom header image to PDF exports and Email Summaries on Plus and above. The PDF header applies to PDF files only, since CSV and Excel exports are raw data. A report you build yourself in a document or slide template can carry any branding you like.

Is there a free Google Analytics report template for clients?

The example report in this article works as a free starting template. Inside Google Analytics, you can also customize the Reports section to show only the reports a client cares about. Looker Studio offers a gallery of dashboard templates too. We walk through both in our guide to Google Analytics dashboards.

What should a year-end Google Analytics report include?

A year-end Google Analytics report covers the same five parts as a monthly report, over a full year. Its headline is the year’s total key events next to the year before. If the client plans around a fiscal year rather than a calendar year, set the date range to match it, so the review lines up with their budget decisions.

Why don’t key events in Google Analytics match conversions in Google Ads?

“Conversions” are a Google Ads metric created from key events, so the two measure related but different things. Google Ads conversions show up in the Advertising section of Google Analytics rather than in the standard reports. In a client report, I’d keep key events for website results and save conversions for the paid ads section.

Should a client report include bounce rate?

It can, but engagement rate is easier to explain. In Google Analytics, bounce rate is the percentage of sessions that were not engaged, which makes it the exact opposite of engagement rate. Engagement rate describes what went right, so it gives the client the same information in a more useful frame.

I hope this article helped you build Google Analytics reports your clients can read in a minute and act on. If you liked this article, check out the following beginner-friendly guides:

Follow us on Twitter, Facebook, and YouTube for more Google Analytics tips.

How useful was this post?

Click on the stars to rate

Average rating 0.0/5

Want to Try MonsterInsights for Free?

Enter the URL of Your WordPress website to install MonsterInsights Lite.